Tanks
Potable water
Food contact
ADVANTAGES & BENEFITS:
– Setting time 2-3 min.
– Low modulus
– No VOC’S and no odors
– Ambient moisture insensitive during application
– Application until -15°C (5°F) on site
SUBSTRATES:
Concrete, iron, steel, wood, tiles, geotextile, non-woven fabrics, EPS/XPS (polystyrene), Flexible PUR foam, EPE (Expanded Polyethylene), EPP (Expanded Polypropylene).
SUITABLE FOR:
– Soft coating for multipurpose applications
– Tanks, containers that need approved PW coating
– Secondary containment
– Horizontal sealing, filling of cracks and holes
WAY OF APPLICATION
Spraying with a suitable high pressure and high temperature plural component equipment.
SUBSTRATES PREPARATION
Concrete:
Before application check surface must be dry (internal moisture not above 5%), cleaned and structurally sound. The suitable surface is the one finished to the semi-civil type. In case of new concrete level the surface using epoxy mortar and check the surface must be without bugholes. Do not apply PUA before 28 days from casting of concrete. In case of application on new or to restore ground floor be sure of the presence of a vapor barrier.
Steel or wood:
Surface must be cleaned, dry and with coarse profile (sandblasting or shotblasting).
EPS/XPS (Polystyrene), Flexible PUR Foam:
Direct application.
EPE (Expanded Polyethylene), EPP (Expanded Polypropylene):
Specific treatments requested.
For other kind of surfaces please contact our technical office. In any case we suggest to apply a thin layer of epoxy or polyurethane primer.
